☞
To move the position up or down
Press or
■
To use Red/Green filter:
Press
■
To release masking and filter:
Press any chart button
4. Programmed operation
■
To install Program
“
A
”
1) Make sure press the button of
“
LAMP
”
to turn off the lamp.
2) Keep pressing the left button to be heard buzzer
sound 4 times. Then, start the mode of program A.
3) Press one of the chart buttons to memorize.
4) And then,
press the right button and heard buzzer sound
1 time to memorize the selected chart.
5) Repeat the process
③
,
④
to memorize the selection you want.
6) Press the left button and heard buzzer sound 3 times to
complete the installation of Program A.
■
To install Program
“
B
”
1) Make sure press the button of
“
LAMP
”
to turn off the lamp.
2) Keep pressing the right button to be heard buzzer
sound 4 times. Then, start the mode of program B.
3) Press one of the chart buttons to memorize.
LUXVISION - LCP-2600
Summary of Contents for LCP-2600
Page 1: ......
Page 10: ......
Page 12: ...5 8 RS 232C Connector 9 Power Connector 10 Fuse Holders LUXVISION LCP 2600 ...
Page 30: ......
