luxvision LCP-2600, User Manual

Page: 28 / 30

■ Make sure the instrument is disconnected from the power source.
■ If the instrument was installed on a custom mount, please remove the unit from the
mount.
■ Pack the instrument in a sturdy carton with suitable packing materials.
■ After packing, do not hurl and impact cause of breakable goods.
- Do not use this machine near by other machines or electric bulb (ex. Halogen lamp),
it will improperly operate on the effect of electronic waves.
Technical Specifications
Chart 31 Selections
Chart selection speed Average 0.3 sec.
Mask
1 open
3 horizontal lines
3 vertical lines
Filter Red/Green
Projection distance 2.0m~7.0m (3m is standard)
Projection magnification 30 x (at 5m)
Projection size
φ 252mm and 330mm(W) x 225mm(H) (at 5m)
Tilt angle Ball joint (±10 degree)
Lamp
6V 20W(Halogen)
Power source
AC 100~240V 50/60Hz
Power consumption 80VA
Auto-Off function
5~10minutes after
LUXVISION - LCP-2600