background image

LEGAL AND REGULATORY INFORMATION

No part of this publication may be modified or adapted in any way, for any purposes without permission in 
writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to 
make changes to any product to improve reliability, function, or design. No license is granted, either expressly 
or by implication or otherwise under any Luxul intellectual property rights. An implied license only exists for 
equipment, circuits and subsystems contained in this or any Luxul product.

FCC ID: W59XAP1210 
IC: 8584A-XAP1210

Regulatory Compliance

The device complies with internationally recognized standards covering human exposure to electromagnetic 
fields from radio devices. This equipment also complies with FCC radiation exposure set forth for an uncon-
trolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, 
human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.
Unauthorized antennas, modifications, or attachments could cause damage and may violate regulatory 
approvals. Any changes or modifications not expressly approved by the party responsible for compliance 
could void the authority to operate the equipment.
The equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.

Health and Safety Recommendations

 

X

Warnings for the use of Wireless Devices:

 Please observe all warning notices with regard to the usage of 

wireless devices

 

X

Potentially Hazardous Atmospheres:

 You are reminded of the need to observe restrictions on the use of 

radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles 
(such as grain, dust, or metal powders).

 

X

Safety in Hospitals:

 Wireless devices transmit radio frequency energy and may affect medical electrical 

equipment. When installed adjacent to other equipment, it is advised to verify that the adjacent 
equipment is not adversely affected.

RF Exposure Guidelines

 

X

Safety Information:

 The device complies with internationally recognized standards covering human 

exposure to electromagnetic fields from radio devices.

 

X

Warning, Exposure to Radio Frequency (RF) Radiation:

 The radiated output of this device is below the 

FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the 
potential for human contact during normal operation is minimized.

 

X

The end user must avoid any extended human RF exposure directly in front of the device, up to a distance 
of 20cm, when unit is on.

 

X

When servicing the equipment and selecting a location for the antennas, it is important to note that a 
minimum distance of 20cm is required between personnel and the device or antenna to comply with the 
radio frequency exposure limit.

 

X

The antenna used for this transmitter must be installed to provide a separation distance of at least  
20cm from all persons and must not be co-located or operating in conjunction with any other  
antenna or transmitter.

The following safety precautions should be observed:

 

X

Do not touch or move the antenna while the unit is transmitting or receiving.

 

X

Do not hold any component containing the radio such that the antenna is very close or touching any 
exposed parts of the body, especially the face or eyes, while transmitting.

 

X

Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may 
cause damage to the radio.

Summary of Contents for XWS-2210









Reviews: