Luxul Xen XAP-1050, Quick Install Manual

Page: 13 / 16

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
Quick Install Guide
13
5.4 Bridge setup
„
NOTE: „„ Once„you„set„the„XAP-1050„to„Bridge„Client„you„will„not„be„able„
to„access„the„XAP-1050„wirelessly.„We„recommend„configuring„a„
second„SSID„so„you„can„wirelessly„make„changes„later„if„required
5.4.1 Client Mode
„ X
Client: „Connects„to„an„existing„wireless„network„as„a„client„device
When„setting„the„AP„in„Client„Mode„you„will„enter„the„Name„(SSID)„of„the„Network„
it„will„connect„to,„the„Security„Mode„that„Network„uses„and„the„Passphrase„needed„
to„connect.„Then„simply„click„Save„and„Reboot„to„apply„the„changes,„the„Luxul„AP„
will„now„connect„as„a„client„device.
„
NOTE: „„When„connected„as„a„client„device„the„AP„will„hide„all„MAC„
addresses„behind„it’s„own„MAC„Address
5.4.2 dedicated Bridge Mode
„ X
Bridge Root:
„Sets„the„Bridge„AP„to„root„mode,„this„is„the„connection„to„the„main„
network„usually„with„Internet„feed