Luxul Xen XAP-1050, Quick Install Manual

Page: 11 / 16

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
Quick Install Guide
11
„
CAUTION: „„When„attaching„the„circular„power„connector„to„the„XAP-
1050,„Do„Not„over„tighten„the„connector.„Damage„to„the„
connector„may„occur„if„over„tightened.
Install„the„power„supply„in„a„location„that„is„protected„from„immersion„or„pro-
longed„contact„with„water.„The„power„supply„is„IP-64„rated„which„means„it„is„
protected„from„dust„infiltration„and„can„withstand„splashed„water.
Applying Power
Once„the„power„connections„are„made„the„XAP-1050„is„ready„to„power„on.
„
CAUTION: „„Do„not„connect„a„none„PoE„device„the„RJ-45„connect„of„the„
XAP-1050„or„damage„to„the„device„may„occur
ConFigUrAtion
„
NOTE: „„ Configuring„the„Luxul„Xen„AP„with„non-Luxul„routers„may„require„
your„computer’s„IP„address„to„be„changed.
„ „The„Luxul„Xen„XAP-1050„default„IP„addresss„is„192.168.0.15.„If„the„
IP„address„of„your„router„is„not„set„to„the„192.168.0.X„network,„
a„temporary„static„IP„address„must„be„set„on„the„computer„
being„used„for„configuration.„To„do„so,„set„the„IP„address„of„the„
computer„to„the„192.168.0.X„range„and„then„use„the„default„IP„
address„of„your„XAP-1050„(192.168.0.15)„as„the„Gateway/Router.„
Once„configured,„set„the„computer„IP„configuration„back„to„
“Obtain„Automatically/DHCP.”
„ „Go„to„ http://luxul.com/how-to-videos „for„videos„about„
changing„the„IP„address„of„your„Operating„System.
login
The„XAP-1050„is„not„equipped„with„internal„DHCP„server.„If„connected„to„the„Luxul„
XBR-2300„Enterprise„Dual-WAN„Router,„configuration„will„be„automatic.„Otherwise,„
the„IP„address„of„the„computer„for„login„and„configuration„will„need„to„be„manually„
configured.„The„table„below„lists„the„default„parameters„of„the„XAP-1050.„