a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
17
NOTE:
DHCP is set as
Disabled
by default and is the recommended
setting in order to ensure optimal communications with all Luxul
devices on the network.
IP Address:
An IP address is a numerical label assigned to each device on the net-
work. This fi eld shows the IP address that is assigned to the XAP-1040. To ensure
plug and play capability with other Luxul networking products, the IP Address is
automatically defaulted to 192.168.0.14. If desired, the user can set this to a differ-
ent static IP Address. To change the IP address of the Access Point, simply type in
the desired IP address (the text fi eld will be red if the address is incomplete), click
Apply and then Reboot for the changed to take effect. When connecting to the
Access Point through the web interface, the NEW IP Address must be used.
NOTE:
Each device on the same network must have a unique IP address.
If the Access Point is assigned an IP address already in use, it
will result in an IP address confl ict that will need to be resolved
manually. For optimal communications with all Luxul devices on
the network, it is recommended that IP addresses not be changed
unless absolutely necessary.
Subnet Mask:
To ensure plug and play capability with other Luxul networking
products, the Subnet Mask is automatically defaulted to 255.255.255.0. If desired,
the user can set this to a different static Subnet Mask.
Default Gateway:
A gateway is a router on the network that connects two or
more networks together. Typically the gateway (router) connects the local area
network (LAN) to the Internet. The Internet Service Provider (ISP) often provides
a physical device (usually a DSL modem or cable modem) that connects to the
gateway with an Ethernet cable, thus completing the link to the Internet. For
optimal connectivity and network functionality, this device could also be the
Luxul XBR-2300 Router.
Set the Default Gateway fi eld to the IP address of your network default gateway,
typically your router. The default gateway confi guration is set to the default IP
address of the Luxul XBR-2300 Router.
Operating Mode:
Sets the Operating Mode of the Access Point the available
options are;
Access Point: Allows client devices to connect (default mode)
Client: Allows the AP to connect to an existing network as a client device
Bridge Root: Sets the AP into Bridge Root mode allowing Bridge Clients to
connect (regular client devices cannot connect to this mode)
