17
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
Enable DHCP Server:
Allows you to Enable or Disable the Routers DHCP Server.
Enabled is the default setting.
DHCP Range:
Displays the current DHCP Pool settings of the Router, these settings
can be viewed or modified here.
w
Start:
Allows you to set the Starting IP Address of the DHCP Pool. 192.168.0.100 is
the default setting.
w
End:
Allows you to set the Ending IP Address of the DHCP Pool. 192.168.0.200 is the
default setting.
w
Lease Time (hours):
Allows you to set the number of Hours the DHCP Lease issued
to the Client Device is valid before requiring a DHCP Renew. 12 Hours is the default
setting.
w
Save:
This button is used to Save the configuration changes made on this page.
Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot:
This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel:
This button Cancels any changes made on this page.
NOTE:
After making any changes to the DHCP Server you must click the Save
button to Save your changes, then you must click the Reboot button
for the changes to take effect. You can click the Save button and
proceed to other pages without losing your configured changes.
3.3.2 Static Leases
This page displays the DHCP Static Leases currently configured on the Router.
Select the menu
Network>>Static Leases
to display the following page.
