Luxul XBR-4400 User Manual Download

Page: 34 / 44

XBR-4400

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-4400 Vers: 07314

3.6.3 L2TP (Future Release)

This page displays the L2TP Settings currently configured on the Router.

Select the menu

VPN>>L2TP

to display the following page.

This feature is currently under construction. To be notified of Firmware Releases
including new features please Join our Mailing List at

http://luxul.com

3.6.4 IPSec (Future Release)

This page displays the IPSec Settings currently configured on the Router.

Select the menu

VPN>>IPSEC

to display the following page.

This feature is currently under construction. To be notified of Firmware Releases
including new features please Join our Mailing List at

http://luxul.com

3.7 Administration

There are six submenus in the Administration menu: Admin Password, Firmware Update,
Factory Defaults, Backup/Restore, System Log and Set Time. Click a submenu to view
and/or modify the corresponding settings.

3.7.1 Admin Password

This page displays the Admin Password settings currently configured on the Router.

Select the menu

Administration>>Admin Password

to display the following page.

Administrator Login:

Displays the current Admin Password settings of the Router.

Password:

Allows you to enter a new Admin Password for the Router.

Confirm Password:

Allows you to confirm the new Admin Password for the Router.

Save:

This button is used to Save the configuration changes made on this page.

Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.

Reboot:

This button is used to Reboot the Router after making configuration

changes or can be used to Reboot the Router for any reason.

Cancel:

This button Cancels any changes made on this page.

Summary of Contents for XBR-4400













































Search results

Summary of Contents for XBR-4400

Reviews:

Related manuals for XBR-4400

Brands by name

Popular brands

Luxul XBR-4400, User Manual

Search results

Summary of Contents for XBR-4400

Reviews:

Related manuals for XBR-4400

Brands by name

Popular brands