4
The output power of the amplifier is set and tested during manufacturing. There are no
user modifiable parameters in the amplifier. The Luxul Shock-WAV Wi-Fi Signal Booster
incorporates a Digital Automatic Gain Control (D-AGC) that ensures a consistent and
approved output power.
Please reference section 4 for installation instructions.
2 - Shock-WAV Wi-Fi SignAl BooSter SPeciFicAtionS
Operating Range
2400 - 2483 MHz
Transmit Power
(27dBm)
Transmit Gain
20dB Typical (under D-AGC Control)
Receive Gain
15dB Typical
TX Input Power
+8dBm to +24dBm
Noise Figure
3.5dB Typical
LED Indicators TX\RX
Solid for RX/Blink for TX
Power Consumption
400mW (RX) 5W (TX) Max
Power Options
Power Over Ethernet (POE)
Operating Voltage
12 to 48VDC
Operating Temp
-40F (-40c) to +158F (+70c)
Dimensions
W: 4” (101.6 mm) L: 6” (152.4 mm) H: 1.7” (43.18mm)
Enclosure
Outdoor, Aluminum
RF Connectors
Two (2) Type N Female
Weight
1.5lbs. (68Kg)
3 - getting StArted
3.1 PrecAutionS
Before installing the Shock-WAV Wi-Fi Signal Booster and AP-5181 verify the following:
• Do not install in wet or dusty areas without additional protection. Contact
a Luxul Wireless representative for more information.
• Verify the environment has a continuous temperature range between
-40F to +149F (-40c - +65c).
