Shock-WAV SiGnAl BooStER USER GUidE
7
4 - inStAllAtion ProcedureS
NOTE:
The combination of the Motorola AP-5131 and the Shock-WAV Wi-Fi
Signal Booster requires professional installation. Please contact Luxul
Wireless for more information.
4.1 AttAching Shock-WAV Wi-Fi SignAl BooSter to the MotorolA AP-5131
Shock-WAV Wi-Fi Signal Boosters are typically connected between the AP-5131 and the stock
antenna. For better coverage, use Luxul Wireless X-WAV antennas. A list of certified antennas
can be found in section 3.5.
NOTE:
The primary and secondary radio ports are identified by dots over
the “RADIO” label. One dot for the primary port, and two dots for
the secondary.
2
1
Remove the stock antenna (Figure 1)
1
from your AP-5131’s primary
“RADIO 1” port (Figure 1)
2
.
(Consult your AP-5131’s
documentation for more
details on the radio ports).
Figure 1
Using the included N-Male to RP-SMA-Female adapter (Figure 2)
4
, connect the AP-5131 stock
antenna (Figure 2)
5
to the Shock-WAV Wi-Fi Signal Booster. Be sure to connect the adapter
to the side of the Signal Booster labeled Antenna
(Figure 2)
6
.
