![background image](http://html1.mh-extra.com/html/luxor/le40wtud/le40wtud_installation-manual_1952611006.webp)
LE40WTUD
Page - 6 -
Installation Manual
Electrical Assembly and Cable-Track Management System
Your LE40WTUD Flat Panel Display Cart incorporates the Cable-Track™ Cord Management System. This exclusive
feature manages electrical cords, keeping them safely out of the way. This system includes a 3-outlet, 15 foot surge
suppressing electric assembly (U.L. and C.S.A. listed) which is built into the safety handle. Please review these
instructions carefully to maximize the added safety provided by Luxor’s Cable-Track™ Cord Management System.
Parts List
1 - Surge protected power cord
2 - “E”-clips
1 - Power cord retainer clip
4 - Cord management ties
4 - Sheet metal screws
Step 1.
Firmly seat the 3-plug electric assembly
unit into the handle plug housing (the
top shelf of the cart will need to be
turned over in order to access the
underside of the handle).
Step 2.
To secure the power strip, use the
power strip retaining bracket and
two (2) sheet metal screws and attach
using a flat tip screwdriver.
Step 3.
After the power strip has been
mounted, route the power cord through
the cord retaining track.
Step 4.
Attach the cord management tie into
the starter holes using a sheet metal
screw. Cut off any excess.
Step 5.
Secure the power cord using the cord
management
tie.
Power Strip Retaining Bracket
Cord Retaining Track
Screwdriver
Sheet Metal Screw
Power Strip
Cord Management Tie
Handle Plug Housing
Summary of Contents for LE40WTUD
Page 4: ......