background image

LE40WTUD

 

 

 

 

Page - 2 - 

Installation Manual  

Congratulations on the purchase of your new Luxor Furniture LE40WTUD Flat Panel Display Cart. 
The LE40WTUD is a totally integrated mount/cart solution for 32” – 50” flat panel displays. To truly 
appreciate the capabilities and versatility of the LE40WTUD Flat Panel Display Cart, please read this 
installation manual completely.  

 

Table of Contents 

Warning Statements

....................................................................................................................................................... - 2 - 

Luxor Cart Parts List

....................................................................................................................................................... - 3 - 

Luxor Cart Installation Tools

.......................................................................................................................................... - 4 - 

LE40WTUD Shelf Cart Assembly Instructions

............................................................................................................ - 5 - 

Electrical Assembly and Cable-Track Management System

.................................................................................... - 6 - 

Base Mount Assembly and Installation

........................................................................................................................ - 7 - 

Final Assembly

................................................................................................................................................................ - 9 - 

TTS Stand Parts List

..................................................................................................................................................... - 10 - 

TTS Stand Installation Tools

....................................................................................................................................... - 10 - 

TTS Stand Assembly

.................................................................................................................................................... - 14 - 

Back Cover Plate Installation

....................................................................................................................................... - 16 - 

 

 

Warning Statements

 

WARNING

 

LUXOR FURNITURE DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY LUXOR FURNITURE PRODUCT 
FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED 
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS 
OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY 
SUCH USE, ATTACHMENTS OR MODIFICATIONS. 

 

 

WARNING: 

THE FLOOR SHOULD BE CAPABLE OF SUPPORTING A MINIMUM WEIGHT OF 160 LBS. IF NOT, THE FLOOR MUST BE 
REINFORCED. THE WEIGHT OF THE FLAT PANEL SHOULD BE NO MORE THAN 160 LBS. PROPER INSTALLATION 
PROCEDURES BY QUALIFIED PERSONNEL AS OUTLINED IN THE INSTALLATIONS INSTRUCTIONS MUST BE ADHERED TO. 
FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY. 

 

 

WARNING: 

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER 
SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. 

 

 

 

 

 

 

WARNING: 

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY 
UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY 
DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. 

 

 

Indicates that the power plug is to be disconnected from the 
power outlet. 

 

 

Contact Luxor Furniture with any questions –  

 

Safety precautions must be taken at all times. 

 

 

Customer Service – 847-244-1800 
 

 

Warning and Caution statements. 

 

 

 

 

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display 
and/or damage to the mounting surface. 

 

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in 
damage to the display and could increase the risk of fire. 

 

A qualified person should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the projector 

Summary of Contents for LE40WTUD

















Reviews: