English
- 43 -
available via the scart socket.
VGA Input
5.
is for connecting a personal computer to the TV set.
Connect the PC cable between the
PC INPUT
on the TV and the PC output on your PC.
Note
: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input.
WARNING
: You cannot use VGA and YPbPr at the same time.
SPDIF Out
6.
outputs audio signals of the currently watched source.
Use an
SPDIF cable
to trasfer audio signals to a device that has SPDIF input.
Viewing the Connections - Side Connectors
The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels
1.
that you subscribe to. For more information, see “Conditional Access” section.
Side USB input.
2.
Video Input is used for connecting video signals of external devices.Connect the video
3.
cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the audio
4.
cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your
device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your
device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
The headphone jack is used for connecting an external headphone to the system.
5.
Connect to the HEADPHONE jack to listen to the TV from headphones.
Power Connection
IMPORTANT
: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
•
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial plug to the
•
AERIAL INPUT (ANT)
socket located at the rear of the TV.
D
I
HM
1
SPDIF
Coax.OUT
D
I
HM
2
Aerial or Cable
02_MB62_[GB]_(01-TV)_woypbpr_DVBT_C_PVR_NICKEL17_1910UK_32911W_10078118_50214306.indd 43
02_MB62_[GB]_(01-TV)_woypbpr_DVBT_C_PVR_NICKEL17_1910UK_32911W_10078118_50214306.indd 43
26.03.2012 14:24:02
26.03.2012 14:24:02
