Flow rate chart
Operation
The water flow returning from the heating system passes through the inlet fitting of the dirt separator filter, then it flows through
the internal area where there is the magnet and the stainless steel metal mesh and goes out through the outlet fitting of the dirt
separator filter.
Operating Scheme
The dirt separator filter can be installed in two ways (horizontally or vertically) in order to be suitable to the majority of the
domestic hydraulic circuits already existing as well as the new ones.
Heating system return circuit / dirt separator filter inlet
(1)
Dirt separator filter outlet / towards the boiler
(2)
Position of G 3/4 female end cap
(3)
Position of M12 grey plastic end cap for filter's emptying
(4)
Installation with the filter placed vertically:
Installation with the filter placed horizontally:
