Technical data sheet
Dirt Separator DEMAX
DM 2018
05/07/2019
Function
Energy-saving issues as well as the rational use of resources are very
current topics; therefore it is necessary to keep the heating circuit efficient
by using a magnetic dirt separator filter placed on the return pipe to capture
the impurities present in the heat carrier fluid and avoid any damage they
could cause to the heating system.
This device must be installed on the heating circuit and, once positioned, it
is necessary to fill the heating system up again, emptying the air in excess.
The main technical data are:
It prevents the risk of obstruction of the heating circuit pipes and its
components;
Should the boiler be replaced, the dirt separator filter can be mounted
on the new one too.
Technical data
Maximum working temperature:
65°C (installation on the return circuit of the heating system)
Room temperature:
+5°C
…+ 50°C (indoor installation)
Water working pressure:
1,0 ÷ 2,0 bar
Maximum water pressure:
3,0 bar
Water content in the heating circuit:
~ 0,2 litres
Magnet:
Ø12x60 mm, 4500 gauss
Width (hydraulic fittings excluded):
101,5 mm
Height:
116,5 mm
Net Weight:
175 g
Fittings supplied:
G3/4
Materials
Brass parts:
CW 617 N
– DW UNI-EN 12165:2016
Dirt separator body:
Black polypropylene and glass fibres
Filter:
Stainless steel
