32
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Using IP Camera Motion:
Enable to use the motion detection function of IP camera if the IP camera has
support motion detection and the motion recording will based on IP camera
’s motion detection setting.
IP Setting:
Click
IP setting
to add the IP camera.
1. Click the radio button of
Protocol
to enable the setup of IP camera.
2. Select the
Protocol
,
Model
,
Video Format
,
and
Channel
of the IP camera.
3. Enter IP address and connecting port in
IP Camera Site
column.
4. Also, user can enter URL of IP camera instead of IP address.
5. If the IP camera has authority request, please enable
Authentication
and enter
ID
and
Password
.
6. Click
OK
to connect with the IP camera.
Detail:
To adjust IP camera parameters, click
Detail
. Click
Default
will back to the factory default value.
User can select
Video size
,
Frame rate
,
Bitrate Mode
and
Quality
of camera. Also, user can adjust
Bright
,
Contrast
,
Hue
,
Saturation
, and
I/O Control
of the camera.
The selection and adjustment items may vary by the camera has supported.
I/O Control: Setup the sensor and relay that is embedded on the IP camera.
