BELT DRIVE ANALOG PLAYER PD-151
19
Specifications
Phono motor section
Drive system
Belt drive system
Motor
PID control DC brushless motor
Platter
30 cm machined alminum plate (weight 4.0 kg)
Revolution
33 1/3 rpm, 45 rpm, 78 rpm (3 speeds selectable)
Revolution adjustment range
±6 % (each rotation speed adjustable independently)
Wow and flutter
0.04 % (W.R.M.S.) or less
Tone arm section
Type
Static balance, S-shaped
Effective length
229 mm
Tracking error angle
+1.9° to –1.1°
Overhang
15 mm
Applicable cartridge weight
4 to 12 g * 22 to 32 g when a heavy counterweight (option) is used
Adjustable height range
38 to 60 mm
Anti-skating
0 to 3 g
Attached equipment and others
Attached equipment
[Front panel section]
• Operation switch
• Start/Stop switch
• Rotation speed selection switch
• Rotation speed deviation indicator
• Rotation speed fine tuning volume (33 1/3 rpm, 45 rpm, 78 rpm)
[Rear panel section]
• AC inlet
[Bottom section]
• Insulator
• Phono cable
Accessories
• Platter
• Power cable
• Headshell
• Rubber belt
• EP adaptor
• Rubber mat
• Phono cable (connect to the main unit)
• Counterweight
• Platter mount handle (2 pieces)
• Tone arm height adjustment wrench (2.5 mm)
• Headshell cylinder adjustment wrench (2.0 mm)
• Arm lifter height / arm rest height adjustment wrench (1.5 mm)
• Flathead screwdriver for rotation speed adjustment
• Owner’s Manual (This document)
• Safety cautions
Power source
230 V (50 Hz)
Power consumption
6 W
Weight
15.7 kg
Dimensions
465 (W) x 132.5 (up to top face of platter) (H) x 393 (D) mm
Ambient operating temperature /
Ambient operating humidity
–5 °C to +35 °C / 5 % to 85 % (non condensing)
* Specifications and the appearance are subject to change without notice.
