BELT DRIVE ANALOG PLAYER PD-151
15
Before Connecting
Before connecting other devices, connect the jack side of the
accessory power cable to the AC inlet of this unit.
Before connection is made, turn off the main power switch
of this unit and the power of all other connected devices to
prevent accidents due to noises generated unexpectedly.
How to connect power supply
Use the accessory power cable and insert the AC plug in an
outlet on the wall in the room where the unit will be installed.
Connection with a phone equalizer amplifier
or an integrated amplifier
Connect the pin plug of the phono cable to the phono termi-
nal of a phono equalizer or integrated amplifier.
Connect the white pin plug to the Lch and the red one to the
Rch.
Connection of grounding conductor
Connect the grounding conductor to the signal ground ter-
minal of a phono equalizer or integrated amplifier to be used
together.
Failure to observe this may induce hum noise on music sig-
nals.