20
Selecting DMX Modes
The Timpani offers 8-bit and 16-bit modes.
The 8-bit modes should be used with basic
DMX controllers such as dimming consoles.
16-bit modes are best for use with virtual DMX
control from a computer or advanced 16-bit
DMX controllers.
DMX Modes for the Timpani include:
CCT mode:
( 8 bit and 16 bit) Corresponds to the CCT mode described above. The DMX controller
can adjust the color temperature from 2800 to 10,000 K and set the green/magenta saturation
level.
HSL mode:
( 8 bit and 16 bit) Corresponds to the RGB mode described above. This mode controls
hue and saturation levels. The DMX controller can scroll through the entire color wheel in 1%
increments.
GEL mode:
( 8 bit and 16 bit) Corresponds to the Filter mode described above. GEL mode allows
the DMX controller to apply any of the 150 preset colored gels to any CCT setting.
Note: Details for each DMX mode can be viewed using RDM (Remote Device Management).
To set the DMX mode, follow these steps:
1. Scroll to the DMX Mode menu with the Adjustment dial, and press Select.
2. Use the Adjustment dial to select a DMX mode, and press Confirm.
CCT 8 bit
CCT 16 bit
HSL 8 bit
HSL 16 bit
GEL 8 bit
GEL 16 bit
CONFIRM
BACK
DMX Mode
Summary of Contents for Timpani 1X1
Page 1: ...USER MANUAL...
Page 5: ...5 Top 1 Diffuser slot 2 Barndoor slot 1 2...
Page 29: ...luxlilight com GG2...