4
BSH05S Rev. C1 05/2021
Luxier USA
Installation
B
C
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
B. First place the new faucet through
flange on the mounting surface. The
faucet hole should be 1 3/8” in diameter
on the mounting surface.
C. Insert the plastic washer, metal
washer, and secure the faucet with the
mounting nut.
F
A
01. Plug
02. Setscrew
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Body
08. Aerator
09. Water Supply Hoses
10. Base
11. Screws
12. Rubber Washer
13. Rubber Gasket
14. Metal Washer
15. Locking Nut
16. Pop Up Drain Assembly
D. Use an adjustable wrench to tighten
the water supply hoses. (
IMPORTANT:
Do not overtighten the connections.)
Flexible water supply line
D
E. Remove rubber washer and locking
nut from the drain assembly and slide
the drain into the sink. Install the rubber
washer first and tighten the locking nut
to install the drain.
Rubber Washer
Locking Nut
E
F. Remove the aerator and let the water
run for about 1 minute to clear any
debris in the plumbing system. Check
for leaks at all connections. Reinstall the
aerator to complete the installation.
(
Note
: Sediments or mineral buildup
will clog the aerator and decrease water
flow. It is recommended to clean the
aerator regularly to maintain proper
water flow.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
