LX496
V. 01 – 30/07/2014
5
©Velleman nv
6.
Hardware Installation
Dimensions
The image below shows the dimensions of the device.
Precautions and Site Preparation
Before installation, please observe the following important safety and handling rules to avoid damage to the
equipment and personal injury.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power cord.
The mains plug should always remain readily operable. Unplug the power supply cord from the mains to
disconnect the device.
The environment where you install the device shall be clean, properly lit, free from static, and have
adequate power, ventilation, and sufficient space for all components.
Installation
The LX496 video scan convertor and scaler is designed to be rack-mounted. Before mounting this device, make
sure to read chapters
2. Safety Instructions
and
3. General Guidelines
first.
To install the device:
1.
Mount in a 2U 19" rack.
2.
Leave 1" (2.5 cm) on all sides to ensure proper ventilation.
3.
Mount this device near PC for easy connection and setup.
