LX109
V. 04 – 11/12/2014
3
©Velleman nv
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician should install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc. The device should only be
used indoors with an alternating current of 100 to 240 VAC – 50/60 Hz.
This device is designed for professional use on stage, in discos, theatres, etc. The LX109 should only be
used indoors.
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
high power tri-colour LED panel for eye-candy effects, wash light or blinder effect
Kling-Net supported, to allow auto-configuration over Ethernet
each LED controllable for pixel mapping
DMX controlled via 3, 5, 9, 48 or 53 channels
built-in automatic programs via master/slave or DMX with variable speed
2 x 8 digit LCD display for easy menu setting
COB LED for superior RGB colour mixing
additional power output
bracket for multiple unit connection, to create a wall
heavy duty bracket for truss rigging
equipped with Neutrik powerCON in/out
5.
Overview
6.
About the Kling-Net protocol
ArKaos has designed the Kling-Net protocol to allow the distribution of real-time video data to remote
display devices, such as LEDs or LED panels, over Ethernet.
Kling-Net allows auto configuration of display devices using an etherCON® RJ 45 Ethernet connection.
The LX150 works best with the Arkaos Mediamaster™ Pro software and its Video Mapper extension (Mac
and Windows).
