Luxair LA-350, Installation Manual, Page: 6 / 17

button for sensor), in case the humidity or temperature increase, the motor is started in
automatic way at the intermediate speed for 20 minutes.
The led bars have got a protective layer resistant to liquid infiltration. Small surface
imperfections belong to the process and are to be considered normal.
The remote control is not waterproof, so it must be used in appropriate way.
Short pressing - it switches on the lights/It switches
off the lights.
Long pressing it changes the intensity of the light.
If you press this push button when the motor is off,
the appliance is started at the intermediate speed.
If you press this push button when the motor is
running, you increase the speed until the highest
speed is reached. When the motor is running at the
highest speed after 10 minutes the motor reduces
the speeds in automatic way.
If you press this push button it reduces the speeds
until the lowest speed is raached.
If you press this push button, it stops the motor.
If you press this push button with the motor running
at any speed different from the highest, the timer is
activated and the motor is stopped in automatic
way after 10 minutes.
If you press this push button when the timer is
running, it stops the timer function already set.
EXTERNAL PUSH BUTTON (to be installed directly by the customer).
Extermal Push button for lights (PL):
■
Short pressing - it switches on/off the lights.
■
Long pressing - it changes the intensity of the light.
External Push buttons of the motor (PM):
■
The short pressing starts the motor at the intermediate speed, if you press this with
running motor the motor is stopped.
■
Long pressing with running motor changes the speeds.
■
When the highest speed is set, after 10 minutes the moto reduces the speeds in
automatic way.
7