Operation
1.
Opening and closing.
Push the bottom bar up to open the product or down to close it. If the product is mounted in an
inaccessible position, it can be operated with the aid of a control rod (available as an optional extra).
The control rod can be located into the bottom bar, and allows the product to be opened and closed
with very little effort.
2.
Adjusting the angle of the slat (venetians)
The angle of the slats can be adjusted by turning the knob on the cassette. If the blinds are mounted
at high level, this operation can also be carried out with the aid of the control rod.
3.
Battery driven Tilt only (venetians)
If your venetian blind has been supplied with this option, the slats can be tilted using the remote
control transmitter supplied.
Dem
ounting
To demount the product completely, carry out the fitting instructions in reverse order.
To summarise briefly, this means:
•
Slide the bottom bar up as far as it will go.
•
If you have retained the transport cleat, reattach this to the bottom bar.
•
Pull the cord tension clips out from the side channels and wind the cords round the transport cleat.
•
Unscrew the side channels.
•
Ease the cassette from its brackets with the aid of a flat bladed screwdriver.
Cleani
ng
Roller blinds, Duette® and Plisse shades
The blinds should be cleaned regularly with a feather duster to prevent excessive build up of dust.
All fabrics with the exception of metalised fabrics can also be wiped with a clean damp cloth.
A non-synthetic mild detergent may also be added if necessary to remove more stubborn dirt.
You should only rub or dab gently, to avoid damage to the fabric.
Venetian blinds
Luxaflex® Skylight Venetian blinds can be kept clean by regular use of a feather duster. If necessary,
a damp cloth may used. Stubborn dirt can be removed with the aid of water to which a gentle all purpose
cleaner has been added.
The above cleaning advice has been formulated with care. However we cannot accept responsibility for the results of your cleaning
activities. For further queries, please contact your Luxaflex® dealer.
4 - 4
•
Unscrew the cassette mounting brackets.
Skylight Products
Assembly and Operating instructions
