7.
Removing transport cord cleat
•
Remove the cords from the transport cleat.
•
Remove the transport cleat and keep it in a
safe place, as it will be useful if you need to
8.
Mounting cord tension clips
Clip both cord tension clips into the holders at the
bottom of each side channel.
Warning:
For Duette® and Plissé shades,
ensure that the cords are not twisted.
Assembly Options
9.
Centre tension cable for venetian blinds
(Only supplied with wide Luxaflex® Venetian blinds)
dismantle the product.
•
Place the side guiding sill bracket [
1
] so that
its opening is directly below the groove in the
bottom bar [
2
].
•
Mark the position of the sill bracket, and screw into place.
and screw into place.
•
Slide the locking ring onto the cable with its wider rim at the bottom, and pull the cable tight to
•
Slide the locking ring up by approximately 20 mm from the bottom of the frame and tighten
•
Pull the cable down and locate the locking ring under the sill bracket.
3 - 4
•
Pull down the blind completely.
the grub screw to secure.
remove any slackness.
Skylight Products
Assembly and Operating instructions
