3.
Mounting the packing profiles for 100 or 105° frames
(only if packing profiles supplied)
•
Place the packing profile with the stop against
the frame
[
1
].
•
Screw the packing profiles into place
[
2
].
4.
Fitting the cassette
•
Taking the cassette in both hands and push
it up into the mounting brackets.
•
The front lip at the top of the cassette should
now be sitting flush with the frame.
(Gebruik bij rolgordijnen de meegeleverde
handschoenen om het risico van vlekken op
de stof te voorkomen).
5.
Mounting the side channels
•
Slide the channel under the cassette on each side
[
1
].
Warning
:
-
Make sure that you locate the end guide of the
bottom bar into the groove of the channels.
-
Check that you have not trapped the cords
between the frame and the channels.
•
Position the channels against the frame [
2
].
6.
Screwing the side channels onto the frame
Use enough screws to fill all the holes
predrilled in the side channels.
2 - 4
Skylight Products
Assembly and Operating instructions
