LuxaFlex Lumishade, Product Manual

Page: 5 / 17

5 | P a g e
BLIND DROP CHAIN & CORD CONTROL
LENGTH TRAVERSING WAND CONTROL
LENGTH
1001 – 1200MM 750MM 750MM
1201 – 1500MM 1000MM 750MM
1501 – 1800MM 1250MM 750MM
1801 – 2100MM 1500MM 1250MM
2101 – 2400MM 1750MM 1250MM
2401 – 2700MM 2000MM 1250MM
>2700MM 2000MM 1250MM
NOTE: Drops that require chain longer than 2000mm must be noted on the order form and
are only available in white. A chain and cord tensioner will be supplied with all chain and
cord Lumishade.
CALCULATION FOR NUMBER OF FABRIC BLADES
Fabric Blades = [Width(mm)] / 102 (roundup)
CONTROL PLACEMENT - WAND/CHAIN & CORD
• Chain & Cord: Blades stack on same side for split stack, choose left or right control.
• Travelling Wand: blades stack on side opposite wand. (Single side stack only)
BLADE CLOSURE GAP
• Blades are designed to overlap 25mm for privacy.
• Light leakage may occur due to the closure gap,
which may increase with the length of the blade.
• The closure gap is most visible when viewed from
the side. It is a normal, inherent characteristic of
the product and should not be considered a
defect.
• Blade closure is tighter in one direction than the other when the blades are rotated
closed.
SPLIT STACK CENTRE GAP
• The gap distance between fabric panels of split stack
design when open is approximately 10-15mm.