12 |
P a g e
INSTALLATION INSTUCTIONS
IMPORTANT:
Please read these instructions all the way through before installing. Materials &
Tools
Each Lumishade ordered should include:
•
Mounting clips (Number depends on
size)
•
Mounting brackets (if face fixed)
•
3 screws for each bracket (20mm x 6#
Panhead) (Face Fit)
•
Cord tensioner and screw (If
cord/chain)
TOOLS REQUIRED
•
Steel measuring tape
•
Carpenter’s level
•
Power or battery drill and bits
•
Flat blade and Phillips head screwdrivers
The Lumishade may be installed in Reveal (inside the window frame) or Face (outside the
window frame), this determines the type of brackets to be used.
The 102mm mounting bracket is used for all Lumishade blinds. If required to extend the
Lumishade out from the wall the optional mounting plate can also be used.
REVEAL FIT
The Lumishade should be installed into the recess as far as
possible, while still allowing sufficient clearance for the vanes
to rotate freely.
Optional
–
Mounting plates may
be used to extend the position of the headrail mounting clips to a point outside of the
reveal where required (must be ordered).
Summary of Contents for Lumishade
Page 1: ...Lumishade Product Manual ...
