Base lite
7
rev.02 16-12-11
Instructions for use and maintenance
Base Lite
Motor (if present)
Type
see the manual for the installed motor
Characteristics
EC marked; homologated for awnings
For the characteristics of the optionals, see Chap. 8 “Optionals” and the corresponding instructions.
3.4
▪
Technical name plate
The technical name plate
(A)
, listing the Manufacturer’s reference details, is usually located inside the cassette
profile.
The technical name plate
(B)
, which provides the main data and features of the product, is generally supplied
with the commercial documentation.
4 Transport and installation
4.1
▪
Transport
Handling and transport operations are performed by the Dealer and/or Manufacturer which undertake to
transport the product in suitable packaging and keep it in perfect condition until it is delivered to the customer.
Damage to the product caused by the awning being dismounted and handled/transported after
installation is not covered by the warranty.
Dispose of and/or reuse the packaging according to the regulations in force in the country the product is installed
in.
4.2
▪
Installation
ATTENTION
Assembly, installation and initial start-up operations may only be performed by suitably
qualified specialised technical staff provided by the Dealer or the Manufacturer.
All the instructions and the main safety regulations for performing these operations are described in the
“Assembly Manual” and the “Installation Manual”.
The position chosen by the user to install the product must be able to support the weight of the product and be
large enough to allow the awning to open to its full extent (see “Installation Manual”).
NAME AND COMPLETE ADDRESS OF MANUFACTURER
NAME AND COMPLETE ADDRESS OF MANUFACTURER
see section 3.3
TECHNICAL NAME PLATE
(A)
TECHNICAL NAME PLATE
(B)
