10
Technical data
*)
The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Spare parts
Contact your local dealer.
Part number
302 246
Rated voltage
230 V~, 50 Hz
Capacity
800 W
Protection class
II
Stroke rate at no load
800–2700 min
-1
Maximum cutting depth
• Wood
• Steel
200 mm
20 mm
Hub length
29 mm
Noise output level (L
WA
)*
104 dB(A)
(K = 3 dB(A))
Noise pressure level (L
WA
)*
93 dB(A)
(K = 3 dB(A))
Vibration** on the main handle
(cutting of boards)
< 15,2 m/s²
(K = 1,5 m/s²)
Vibration** on the main handle
(cutting of bars)
< 16,8 m/s²
(K = 1,5 m/s²)
Vibration** on the auxiliary
handle (cutting of boards)
< 15,84 m/s²
(K = 1,5 m/s²)
Vibration** on the auxiliary
handle (cutting of bars)
< 17,74 m/s²
(K = 1,5 m/s²)
Weight
3,25 kg
Suitable saw blades
S shaft (
GB
Saebelsaege_302246.book Seite 10 Mittwoch, 16. September 2015 4:31 16
