Luvion SUPREME CONNECT 2, Instruction Manual

Page: 49 / 102

49
LUVION
Premium Baby products
Problem Solution
No video from the baby
unit 1. Check the power supply of the baby unit. Make sure the power
adapter is plugged in and the green power LED is switched on.
2. Make sure that the parent unit is switched on.
3. Make sure that the baby unit is in range of the parent unit.
4. Make sure that the parent unit is not in the VOX mode (press the
power button shortly to exit the VOX mode)
The video is dropping /
I have a constant low
reception / “Out of Range”
message 1. Move the baby unit closer to the parent unit.
2. Try repositioning the baby and/or parent unit (away from walls) to
improve the reception.
3. Place the antenna of the parent unit in the upright position.
4. (re-)Pair the parent unit with the baby unit (see pairing chapter)
Audio problems 1. Make sure that the volume on the parent unit is not muted. Press
the + volume button on the parent unit to increase the volume.
2. Make sure that there is sound within range of the baby unit
microphone.
3. If the unit emits a loud, screeching noise, move the baby and
parent unit further apart.
The video is or has become
choppy 1. Try moving the baby unit closer to the parent unit.
2. Remove obstructions between the baby and parent unit.
3. Place the antenna of the parent unit in the upright position.
The battery of the parent
unit runs out very fast Use the power save mode or replace the battery with a new original
Luvion battery. Original batteries can be acquired at your local luvion
dealer.
The screen is frozen and I
can’t use the on/off button
to switch off the parent
unit. Try removing the battery form the parent unit to switch of the parent
unit. You can use the on/off button to switch it back on after reinserting
the battery.
TROUBLESHOOTING
If you have any problems with the Luvion Supreme Connect 2, there is often a quick and simple solution.
Please try the following: