9
LUVION
Premium Babyproducts
2.
Mount the baby unit on the wall or put it on a cabinet, table or shelf. To mount the baby
unit on the wall, mark the position of the 2 screw holes on the wall. Drill the holes and insert
the included wall plugs and screws. Firmly attach the baby unit on the wall by placing the
base over the screws and pushing it downwards.
Note:
Place the baby unit outside the reach of the baby!
Avoid installing the baby unit where there are thick walls, or obstructions between the baby
and parent unit. Select a location for the baby unit that provides a clear view of the area you
want to monitor, which is free from dust, and is not in line-of-sight with a strong light source
(or the sun).
3.
Point the camera of the baby unit towards the area you want to monitor. The camera can be
tilted and swivelled to point it at the baby. For good sensitivity it is recommended to place
the baby unit no more than 3 meters away from the baby.
The baby unit can be powered by the included power adapter or by 4AA batteries (not
included).
Power adapter
Connect the DC 5V power adapter to the DC 5V input at the back of the baby unit.
Plug the power adapter in the wall socket.
Batteries
Remove the battery pack cover off the base of the baby unit. Place 4AA batteries into the
battery pack. Make sure to correctly line up the positive and negative poles of the batteries.
Place the battery pack cover back on.
Note:
We advise you always to use the main power for the baby unit. Should there be no main
power around, we advise you to use non-rechargable batteries.
Note:
Should you decide to use batteries, make sure that the power adapter is not connected to
the camera!
USING THE SYSTEM
The video of the baby unit will be displayed on the screen of
the parent unit when both are switched on.
1. Signal indicator
The signal indicator shows the strength of the signal being
recieved from the baby unit. One or no bars indicates a poor
signal and 4 bars indicate a strong signal (see table below).
25°C
1
2
3
5
4
6
Cam 1
