LUVERNETRUCK.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
571726-INS-RA
•
PAGE 1
INSTALLATION MANUAL
571726
Tools Required
Socket, 1/2"
Drill bit, 3/8"
Wrench, 1/2"
Drill bit, 3/32"
Flathead
screw driver
Drill bit, 19/64"
Marker
Putty knife
Maintenance
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Level of Difficulty
Easy
This is the first of two manuals
required to complete this installation.
The second manual is included with
your side steps / running boards.
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
Parts List
1
Front mounting bracket
1
AC mounting top bracket
1
AC mounting bracket
2
Bolt retainer
6
Lock washer, 5/16"
2
Flat washer, 5/16"
2
Thread-cutting screw, 5/16"
1
U-bolt 3"
6
Bolt, M8
4
Clip nut, M8
4
Flange nut, M8
