Control
System setup
37
© Lutz-Jesco GmbH 2014
Subject to technical changes.
140725
BA-10103-02-V01
Stepper Motor-driven Diaphragm Dosing Pump
MEMDOS SMART LK
Operating instructions
4.
Choose the last item
Off
and press
+
.
5.
Press
Back
.
The
Release code
is activated. The dosing pump displays the
corresponding symbol:
Manual mode
Liter
day
0.0%
0.00
Fig. 39: Start screen with activated Release code
10.7.6.1 Entering the Release code
Once you press any key, you must enter the
Release code
. If you enter
the code correctly, you have 120 seconds in which to operate the dosing
pump. When the 120 seconds have elapsed, you must re-enter the
Release code
, even if you are in the middle of making another entry
(this does not include settings in the menus).
Release code
1 1 1 1
Back
8.1
Next
-
+
Fig. 40: Entering the Release code
1.
Use the
+
and
-
keys to set a value of 0 to 9 for the fi rst digit of the
code and then press
Next
.
2.
Proceed as described under point 1 for the other digits.
3.
After entering all the digits, press
OK
.
If your input is correct, the dosing pump displays the start screen.
i
If you have forgotten the code, please contact Lutz-Jesco
GmbH.
10.7.6.2 Deactivating the Release code
1.
Press
Menu
.
2.
Use the or key to choose the
System setup
menu item and
press
OK
.
3.
Use the or key to choose the
Release code
menu item and
press
Setup
.
4.
Keep pressing
Next
until
On
is selected.
5.
Press
-
.
6.
Press
Back
.
Release code deactivated.
10.7.7 Deactivating the safety code
Protects the
System setup
menu from unauthorized access.
You can set any
Safety code
you like from 0000 to 9999.
1.
Use the or key to choose the
Safety code
menu item and
press
Setup
.
The dosing pump displays menu 6.11
Safety code
.
Safety code
1 2 3 4 Off
Back
6.11
Next
-
+
Fig. 41: Safety code
2.
Use the
+
and
-
keys to set a value of 0 to 9 for the fi rst digit of the
code and then press
Next
.
3.
Proceed as described under point 2 for the other digits.
4.
Choose the last item
Off
and press
+
.
5.
Press
Back
.
The
Safety code
is activated. You must enter it when accessing
the
System setup
menu.
10.7.7.1 Entering the safety code
Safety code
1 1 1 1
OK
8.2
Next
-
+
Fig. 42: Entering the safety code
1.
Use the
+
and
-
keys to set a value of 0 to 9 for the fi rst digit of the
code and then press
Next
.
2.
Proceed as described under point 1 for the other digits.
3.
After entering all the digits, press
OK
.
If your input is correct, the dosing pump displays the
System
setup
menu.
i
If you have forgotten the code, please contact Lutz-Jesco
GmbH.
10.7.7.2 Deactivating the safety code
1.
Press
Menu
.
2.
Use the or key to choose the
System setup
menu item and
press
OK
.
3.
Enter the correct
Safety code
and press
OK
.
4.
Use the or key to choose the
Safety code
menu item and
press
Setup
.
5.
Keep pressing
Next
until
On
is selected.
6.
Press
-
.
7.
Press
Back
.
The safety code is deactivated.
