Page 4
2
FASTEN MOUNTING BRACKETS
A.
Position the bracket’s “teeth” for each bracket at the ends of the fabric width as shown. Use a level to ensure
the brackets are at the same height and parallel to the window casing.
Note:
Fasten the top of the brackets 5”(127 mm) from the top of the window trim to ensure complete window
exposure when the shades are in full up position.
B.
Fasten the brackets to studs in the wall using four (4) pan-head mounting bracket screws.
Fabric Width
5”
(127mm)
5”
(127mm)
A
B
Fabric Edge
Fabric Edge
Teeth
Line up the bracket teeth with the
fabric edge
Once the mounting brackets have been fastened to the wall, confirm the
Bracket to Bracket Width
as listed on the
Sivoia
Order Invoice. Refer to Figure 1 on page 3 for a detailed diagram. Make any
necessary bracket position adjustments based on this assessment.
