®
Job Name:
Job Number:
Model Numbers:
Page
S P E C I F I C A T I O N S U B M I T T A L
369656b 7 05.04.12
Occupant Sensors
ULOS-CIR Series
Sensors
Sensor Adjustments
Timer Test Mode
Factory Settings
1. Remove the retainer cover.
2. Rotate the black timer adjustment knob to about
midway (12 o’clock).
3. Return setting to minimum setting (full CCW).
Note: The timer will remain in the 8-second test
mode for 1 hour, then automatically reset to
8 minutes.
4. To manually take the timer out of the 8-second
test mode, turn the timer adjustment approximately
1/16 in (1.5 mm) clockwise to make the setting
slightly above minimum (just above the 8-minute
setting).
Factory Settings
12 o’clock
Full CCW
Auto/Manual
Threshold
LED Motion Indicator
Reset Learned Settings
Strong Airflow Compensation
Over Doorway Installation
Timer Adjust
Auto Sensitivity
Off (Default)
On
Automatic (Normal)
Manual on/off (Override)
Auto Threshold Adjustment
High Sensitivity (Low turn-on threshold)
Lights indicate motion
Disable LED Indicator
Retain Settings (Normal)
Erase all learned settings,
Restart Learning (Toggle On)
Off
On
Disable Compensation (Normal) Enable Compensation
No (Normal)
Yes (Use increased turn-on threshold)
Adjust Timer Automatically
Use Manual Setting (No adjustment)
Adjust Sensitivity Automatically Adjust Sensitivity Manually
ON
ON
A
1
2
3
4
B
1
2
3
4
Override Settings
ON
ON
ON
ON
A
1
2
3
4
B
1
2
3
4
Black: Timer
8 min.
Red: Infrared
sensitivity
75% default
