Lutron Electronics TM-946, Manual, Page: 20 / 24

* Use the " button "( 3-5, Fig. 1 ) " button " ( 3-7,
▲ ▼
Fig. 1 ) to adjust the desiring value on right bottom
display.
* Pressing " Enter button " ( 3-4, Fig. 1 ) once, both
bottom display will flashing 4 times then return to
normal measuring screen and finish the offset
adjustment procedure.
* The above offset adjustment for Pt 100 ohm is
valid for PT1, PT2 individually.
8. AUTO POWER OFF DISABLE
The meter is built the " Auto power shut off " to saves
battery life. If any buttons not be pushed within 10
minutes, then the power will be off automatically.
If the user is not intend to execute the " Auto Power off "
function, it should take the following procedures :
During the measurement, push the " Record
Button" ( 3-4, Fig. 1 ) to execute the memory
record function, the auto power function will
disable.
18