Lutron Electronics TM-946, Manual, Page: 15 / 24

5-2 Clear the existing saving data from the memory
1)Pressing " CLR button " ( 3-6, Fig. 1 ) continuously at
least two seconds then release, the display will show :
SEnd CLr
2)Pressing " R button " ( 3-7, Fig. 1 ) once, the display
will show as example :
the data no. already
508 save into the memory
CLr n ( y )
* Use the " button "( 3-5, Fig. 1 ) " button " ( 3-7,
▲ ▼
Fig. 1 ) to change the right bottom text from " n " to
" y ".
* Pressing " Enter button " ( 3-4, Fig. 1 ) once, the data
no. will show zero value and flashing 4 times then
return to normal measuring screen, the data no.
will be erased from the memory.
During the display flashing, if pressing the " ESC
button " ( 3-3, Fig. 1 ) will exit the memory clear
function.
13