background image

THIS WARRANTY IS IN LIEU OF ALL OTHER 

EXPRESS WARRANTIES.  ALL IMPLIED 

WARRANTIES, INCLUDING THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND 

OF FITNESS FOR A PARTICULAR PUR-

POSE, ARE LIMITED TO EIGHT YEARS 

FROM THE DATE OF SHIPMENT, EXCEPT 

THAT SUCH IMPLIED WARRANTIES ARE 

LIMITED TO ONE YEAR FROM THE DATE 

OF SHIPMENT AS TO THE EXTERNAL 

Sivoia QS COMPONENTS.

NO LUTRON AGENT, EMPLOYEE OR REP-

RESENTATIVE HAS ANY AUTHORITY TO 

BIND LUTRON TO ANY AFFIRMATION, REP-

RESENTATION OR WARRANTY CONCERN-

ING THE SYSTEMS.  UNLESS AN AFFIRMA-

TION, REPRESENTATION OR WARRANTY 

MADE BY AN AGENT, EMPLOYEE OR REP-

RESENTATIVE IS SPECIFICALLY INCLUDED 

HEREIN, OR IN STANDARD PRINTED MA-

TERIALS PROVIDED BY LUTRON, IT DOES 

NOT FORM A PART OF THE BASIS OF ANY 

BARGAIN BETWEEN LUTRON AND CUS-

TOMER AND WILL NOT IN ANY WAY BE 

ENFORCEABLE BY CUSTOMER.

IN NO EVENT WILL LUTRON OR ANY OTH-

ER PARTY BE LIABLE FOR EXEMPLARY, 

CONSEQUENTIAL, INCIDENTAL OR SPE-

CIAL DAMAGES (INCLUDING, BUT NOT 

LIMITED TO DAMAGES FOR PERSONAL 

INJURY, FAILURE TO MEET ANY DUTY, 

INCLUDING OF GOOD FAITH OR REASON-

ABLE CARE, NEGLIGENCE, OR ANY OTHER 

LOSS WHATSOEVER), NOR FOR ANY RE-

PAIR WORK UNDERTAKEN WITHOUT LU-

TRON’S PRIOR WRITTEN CONSENT ARIS-

ING OUT OF OR IN ANY WAY RELATED TO 

THE INSTALLATION, DEINSTALLATION, USE 

OF OR INABILITY TO USE THE SYSTEM 

OR OTHERWISE UNDER OR IN CONNEC-

TION WITH ANY PROVISION OF THIS WAR-

RANTY, EVEN IN THE EVENT OF THE FAULT, 

TORT (INCLUDING NEGLIGENCE), STRICT 

LIABILITY, BREACH OF CONTRACT OR 

BREACH OF WARRANTY OF LUTRON OR 

ANY OTHER PARTY, AND EVEN IF LUTRON 

OR SUCH OTHER PARTY WAS ADVISED OF 

THE POSSIBILITY OF SUCH DAMAGES. 

NOTWITHSTANDING ANY DAMAGES THAT 

CUSTOMER MIGHT INCUR FOR ANY REA-

SON WHATSOEVER (INCLUDING, WITHOUT 

LIMITATION, ALL DIRECT DAMAGES AND 

ALL DAMAGES LISTED ABOVE), THE EN-

TIRE LIABILITY OF LUTRON AND OF ALL 

OTHER PARTIES UNDER THIS WARRANTY 

ON ANY CLAIM FOR DAMAGES ARISING 

OUT OF OR IN CONNECTION WITH THE 

MANUFACTURE, SALE, INSTALLATION, DE-

LIVERY, USE, REPAIR, OR REPLACEMENT 

OF THE SYSTEM, AND CUSTOMER’S SOLE 

REMEDY FOR THE FOREGOING, WILL BE 

LIMITED TO THE AMOUNT PAID BY CUS-

TOMER FOR THE SYSTEM. THE FOREGO-

ING LIMITATIONS, EXCLUSIONS AND DIS-

CLAIMERS WILL APPLY TO THE MAXIMUM 

EXTENT ALLOWED BY APPLICABLE LAW, 

EVEN IF ANY REMEDY FAILS ITS ESSEN-

TIAL PURPOSE. 

THIS WARRANTY GIVES YOU SPECIFIC 

LEGAL RIGHTS.  YOU MAY ALSO HAVE 

OTHER RIGHTS WHICH VARY FROM STATE 

TO STATE.  SOME STATES DO NOT ALLOW 

LIMITATIONS ON HOW LONG AN IMPLIED 

WARRANTY LASTS OR THE EXCLUSION 

OR LIMITATION OF INCIDENTAL OR CON-

SEQUENTIAL DAMAGES, SO THE ABOVE 

LIMITATIONS OR EXCLUSIONS MAY NOT 

APPLY TO YOU.

WARRANTY CLAIMS, TECHNICAL ASSIS-
TANCE AND WARRANTY INFORMATION. 

Contact the Lutron Technical Support Center at 
the numbers provided below or your local Lutron 
sales representative with questions concerning 
the installation or operation of the System or this 
Warranty, or to make a warranty claim. Please 
provide the exact model number when calling.

The product may be covered under one or 
more of the following U.S. patents: 6,497,267; 
6,983,783; 7,281,565, and corresponding  
foreign patents. U.S. and foreign  
patents pending.

Lutron, the Sunburst logo, and  
Sivoia QS are registered trademarks of  
Lutron Electronics Co., Inc.

Page 22

Sivoia

®

 QS 

roller 100

TM

 Pocket Mount 

Installation instructions

Summary of Contents for Sivoia QS roller 100

























Reviews: