Autonomic Programming Guide
|
7 of 9
5.0 Configuring keypads with
Mirage Media commands
Once a keypad is added to your configuration, all available keys with their engraving text
will be displayed. To confirm the physical button you would like to program matches the
the keypad button displayed, simply tap the button on the RadioRA 2 keypad for a blue
check box to appear next to its matching button in the configuration.
•
Select the button you would like to program and click the [+] button
•
Choose the button press event that will fire the actions.
These events are:
•
Press: A button is pressed and quickly released
•
Hold: A button is pressed and held for roughly 2 seconds
•
A button can be configured with either a press event, a hold event, or both.
Each button press event can trigger one or more actions.
•
To add an action click the [+] below the actions area and choose the MMS action
you would like to associate with that button press
•
Select the MMS output or zone you would like that action to be available in
•
IF the selected action has any additional parameters, select them in the last drop
down menu
•
Click Action [+] to add more actions to the same button press event
•
Additional button press events can be added as described above
