3)Plug in the above plugs into
4-20 mA CH 1 input socket ( 3-10, Fig. 1 )
4-20 mA CH 1 input socket ( 3-11, Fig. 1 )
4-20 mA CH 1 input socket ( 3-12, Fig. 1 )
Remark :
* The up Display value will present the CH1 pressure value.
* The middle Display value will present the CH2 pressure value.
* The low Display value will present the CH3 pressure value.
5. DATALOGGER
5-1 Preparation before execute datalogger function
a. Insert the SD card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),
insert the SD card into the " SD card socket " ( 3-16, Fig. 1)
with the correct direction exactly.
* It recommend use memory card's capacity is 4 GB.
≦
b. SD card Format
If SD card just the first time use into the meter, it
recommend to make the " SD card Format " at first,
please refer chapter 7-1 ( page 13 ).
* It recommend strongly, do not use memory cards
that have been formatted by other meter or by
other installation ( such as camera... ). Reformat
the memory card with your meter.
* If the SD memory card exist the trouble during
format by the meter, use the Computer to
reformat again can fix the problem.
7
