Lutron Electronics LOS-W Series Installation Instructions Manual Download Page 1

®

Occupancy Sensor
LOS-W Series
Installation Instructions 

(U)LOS-WIR
(U)LOS-WDT
(U)LOS-WDT-R
IEC PELV/NEC

R

 Class 2 Devices

English

Range Diagram and Dimensions

US 

Minor 

Motion

IR Minor Motion

IR Major Motion

US 

Major 

Motion

US Major Motion

US Minor Motion

Description

The LOS-W Series of wall-mounted sensors incorporate infrared (WIR) and dual technologies (WDT) - 
ultrasonic and infrared. They are used in spaces with pendant fixtures, ceiling fans, or high ceilings. They 
integrate into Lutron

R

 systems or function as stand-alone controls using a Lutron

R

 power pack.

Features

•  Intelligent, continually adapting sensors
•  20 to 24 V

-

IEC PELV / NEC

R

 Class 2

, 33 mA nominal

• 1600 ft

2

 (150 m

2

) coverage

•  Flexible mounting on wall or ceiling
•  Second dry contact closure output available on -R models
•  LED indicators: Ultrasonic (US)-green, Infrared (IR)-red
•  For indoor use only

Coverage and Placement

•  The occupant sensor must have an unobstructed view of the room. Do not mount behind or near tall cabinets, 

shelves, indirect hanging fixtures, etc.

•  For -WIR models, do not place sensor within 4 ft (1.2 m) of air vents, air handlers, windows, fans, etc., as this 

may cause false triggering.

•  For -WDT and -WDT-R models, do not place sensor within 6 ft (1.2 m) of air vents, air handlers, windows, 

fans, etc., as this may cause false triggering.

•  Place the sensor on the same wall as the doorway so that hallway traffic will not affect the sensor.
•  Closely follow the diagrams for major and minor motion coverage.
•  Decrease total coverage area by 15% for “soft” rooms (e.g. heavy draperies or heavy carpeting).
•  Indicated coverage is when sensor is mounted at 8 ft (2.4 m) high.

Model

US Minor Motion

US Major Motion

IR Minor 
Motion

IR Major 
Motion

WIR

NA

NA

20 ft (6.1 m)

40 ft (12.2m)

WDT

23 ft x 23 ft (7.0 m x 7.0 m)

32 ft x 32 ft (9.8 m x 9.8 m)

20 ft (6.1 m)

40 ft (12.2 m)

WDT-R

23 ft x 23 ft (7.0 m x 7.0 m)

32 ft x 32 ft (9.8 m x 9.8 m)

20 ft (6.1 m)

40 ft (12.2 m)

P/N 031259 Rev C 03/13

US - 

Ultrasonic

IR - 

Infrared

Summary of Contents for LOS-W Series









Reviews: