background image

®

Job Name:

Job Number:

Model Numbers:

Page

S P E C I F I C AT I O N   S U B M I T TA L

Occupant Sensors

LOS-CUS Series

Sensors

Installation

LOS-CUS-1000

LOS-CUS-500

LOS-CUS-2000

64 ft. (19.5 m)

45 ft. (13.7 m)

23 ft.

(7 m)

32 ft.

(9.8 m)

Sensor Placement

Range Diagrams

• Mount the sensor so the grilles face the open portion of the room and are not facing a nearby wall,

window, or other obstructing object.

• Keep the occupant sensor away from air flow from ventilation outlets, windows, fans, etc.
• If installing a 180° occupant sensor (500 and 1000 models), place the sensor on the same wall as the

doorway so that traffic in a hallway will not affect the sensor; otherwise, place in center of room.

• Closely follow the diagrams shown concerning major and minor motion coverage. The sensor can detect

major motion (such as a person taking a half-step) at a greater distance than it can detect minor motion
(such as writing or typing at a desk).

• Decrease total coverage area by 15% for “soft” rooms (for example, heavy draperies or heavy carpeting).

Major motion detection

Minor motion detection

22 ft. (6.7 m)

16 ft. (4.9 m)

16 ft.

(4.9 m) 22 ft.

(6.7 m)

32 ft. (9.8 m)

23 ft. (7 m)

23 ft. 

(7 m)

32 ft.

(9.8 m)

LOS-CUS   5

09.04.08

5

Summary of Contents for LOS-CUS-500-WH








Reviews: