R
LCP128
TM
Setup and Maintenance Guide
33
STEP 4 (continued)
Configure Key Switch
(NTOMX-KS)
Lutron’s NTOMX-KS key switch control station can
be programmed to initiate an action for a clockwise
and counter-clockwise turn.
A.
From the
Main Menu
use and to
highlight
Control Station Setup
and
press or (OK).
B.
Use
and
to highlight the address of the
NTOMX-KS
you would like to configure and press
or (Next).
C.
Use
and
to change control type to
Key Switch
and
press or (Next)
.
D.
Use
and
to highlight which direction turn to
program and press
or
(Next). Each key
switch can be programmed for a clockwise or
counter-clockwise turn. Both may be programmed.
E.
Use
and
to select the type of
Action
for this
key turn:
Lower Circuits
,
Raise Circuits
,
Scene
,
Custom Scene
,
Enable Time Clock, Disable
Time Clock, Delay to Off
,
Toggle,
and
No Action
and press
or
(Next). Refer to the beginning of
STEP 4 for an explanation of the various action
types.
F.
Program the
Lower Circuits
,
Raise Circuits
,
Scene
,
Custom Scene
,
Delay to Off
, or
Toggle
action using the same screen methods used to
configure a wallstation button. Refer to “Configure
the Wallstations” earlier in STEP 4.
OK
OK
OK
OK
OK
Address 03 Setup
Type:
Key Switch
Previous
Next
Main Menu
Overrides
Time Clock Setup
Control Station Setup
Panel CCI Setup
Back
OK
Control Station Setup
Address 01
Address 02
Address 03
Address 04
Cancel
Next
A.
B.
C.
Address 03 Setup
Clockwise Turn
Counter - Clockwise Turn
Previous
Next
D.
Address 03 Key Switch
Action:
Previous
Next
Scene
F.