Shading Solutions
4-Group RF Remote Control
Models CS-YJ-4GC-WH, CS-YK-4GC-WH • Setup Guide—Please Read Before Operating
English
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
02/2015
P/N 045411 Rev. D
Lutron,
O
, Serena, Sivoia, Triathlon, HomeWorks, and RadioRA are registered trademarks of Lutron Electronics Co., Inc.
Device Description
Assignment to Lutron
®
Window Treatments
Equipped with Sivoia
®
QS Wireless RF Receiver
Assignment to a Serena
®
or Sivoia
®
QS Triathlon
®
Shade
Removing and changing Shade Group assignments:
Removing and changing Shade Group assignments:
Setting a Serena
®
or Sivoia
®
QS Triathlon
®
Shade Favorite Level
Setting or Adjusting Serena
®
or Sivoia
®
QS Triathlon
®
Shade Limits
Models: CS-YJ-4GC-WH, CS-YK-4GC-WH
3 V
-
50 mA
The Lutron
®
4-Group RF remote control is a flexible and easy to use
device that allows the user to control Lutron
®
wireless shades from
anywhere in the space. This battery-operated control requires no
external power or communication wiring.
• Provides control of Lutron
®
shades in the following systems:
– Standalone
Serena
®
RF Remote Control Honeycomb and Roller Shades
Sivoia
®
QS Triathlon
®
Honeycomb and Roller Shades
Sivoia
®
QS Wireless shades
– HomeWorks
®
QS systems (CS-YJ-4GC-WH only)
– RadioRA
®
2 systems (CS-YJ-4GC-WH only)
– Lutron
®
Smart Bridge (CS-YJ-4GC-WH only)
• Battery-powered; requires no wiring
• Backlit buttons clearly indicate which Shade Group is selected
• 7-year battery life (two AAA alkaline batteries included)
Open button
Tap once: shade
opens to its upper limit
Close button
Tap once: shade
closes to its lower limit
All Shades
button
Tap once to select
all shades
Raise & Lower
buttons
Press and hold to
move the shade
Favorite button
Tap once to move
the shade to a
favorite position
LED ON
LED FLASHING
2. The Shade button
illuminates.
LED ON
LED FLASHING
2. The Shade button
illuminates.
LED ON
LED FLASHING
4. The Shade
button flashes.
Assignment is
complete.
5. Repeat for
additional
shade/control
assignments.
6. Repeat steps 1 through 5 for additional
shades/groups to be assigned.
3. Choose a Shade Group
button. Press and hold.
1. Tap the Shade button.
Honeycomb
Roller
1. Tap the Shade button.
Honeycomb
Roller
3. Press and hold the Open
and Raise buttons.
4. The Shade button
flashes, then
stays on.
LED ON
LED FLASHING
LED ON
LED FLASHING
5. Use the Raise and Lower buttons
to position the shade at the
preferred upper or lower limit.
LED ON
LED FLASHING
7. The Shade button
flashes. Limit set
is complete.
SET UPPER LIMIT
With the shade at the
preferred upper limit, press
and hold the Open button.
OR
SET LOWER LIMIT
With the shade at the
preferred lower limit,
press and hold the
Close button.
3. Press and hold the
Favorite button.
2. Use the Raise and Lower
buttons to position the
shade(s) at the desired
favorite level.
LED ON
LED FLASHING
4. The Shade button
of each shade in
the active Shade
Group flashes.
Favorite level is set.
1. Press and hold the device drive’s
Open
button.
Before starting, verify that the device
drive LED is OFF, and the window
treatment is positioned at its Open Limit.
If the LED is illuminated, tap the drive’s
Open
button. The LED will turn off.
IMPORTANT:
The Favorite Level
function applies to Shade Groups.
•
An individual Favorite Level can be
set for each of the 4 Shade Groups.
•
A 5th Favorite Level can be set for
All Shades.
•
A shade that belongs to multiple
groups will move to the Favorite
Level set for the Shade Group that
is active when the Favorite button
is pressed.
LED OFF
3. Tap the device drive’s
button
(arrow button next to the LED).
4. The device drive and wireless receiver
are in assignment mode, with LED’s
flashing every 4 seconds.
2. The drive LED flashes, then stays
on. Release the Open
button.
5. Choose a Shade Group button. Press and hold for
5 seconds.
The window treatment(s) will move a short distance
or “wiggle,” confirming successful assignment.
6.
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
LED ON
LED FLASHING
Shade Group
buttons
Tap once to select
shades assigned to
the corresponding
group (number)
The Lutron
®
4-Group RF remote control
is safe for use around baths and spas.
NOTICE:
DO NOT
submerge in water.
a.
To remove the assignment of a particular shade to a Shade Group button, restore the shade to its factory default settings according to the instructions
included with the shade.
b.
To change the Shade Group button to which a particular shade is assigned, follow step a. above to remove the original assignment, then follow the
steps under Assignment to a Serena
®
or Sivoia
®
QS Triathlon
®
Shade, and choose a different Shade Group button at step 3.
a.
To remove the assignment of a window treatment to a Shade
Group button, restore the device drive to its factory default settings
according to the instructions included with the window treatment.
b.
To change the Shade Group button to which a particular device is
assigned, follow step a. above to remove the original assignment,
then follow the steps under Assignment to Lutron
®
Window
Treatments Equipped with Sivoia
®
QS Wireless RF Receiver, and
choose a different Shade Group button at step 5.
1. Tap the desired Shade
Group button or the
All Shades button.
• This setup guide provides basic instructions for assigning and using the Lutron
®
4-Group RF Remote Control with Lutron
®
shade products in stand-alone applications.
• To assign and use the remote control in a RadioRA
®
2 system, use the RadioRA
®
2 Essentials or Inclusive software.
• To assign and use the remote control in a HomeWorks
®
QS system, use the HomeWorks
®
QS Design and Programming software.
• To use the remote control with Lutron
®
Smart Bridge, use the Lutron
®
App.
