EN
61
Aerwards we realize a description of blocks:
• Block A:
"General Function":
By means of the options and its combo boxes the user
can configure a number of general functions such as selecting the level of squelch,
activate / deactivate autolock, excess transmission time, etc... Basically there are
functions that can also be configured using the transceiver menus and its keyboard.
• Block B:
"VOX":
in this option we can select:
- VOX Gain Level: VOX sensitivity level or deactivate it.
- VOX Delay Time (s): This option is only configurable through software of the
TL-88 and indicates the time in which the equipment will continue in TX transmission
once the conversation is finished. This configuration is important if the user is using a
communication and makes breaks, normally the logical pauses to breathe for example.
If the configuration is the minimum of 0.3 seconds, a short pause for breath would cut
the transmission, if on the contrary the configuration was the maximum of 2.0
seconds from the moment you stop talking the transceiver will wait 2 seconds up to
cutting the transmission TX and to enter in receive mode RX.
• Block C:
"Enable Menus"
Menus enabled. This selection allows you to enable or disable
the manipulation of those functions. Clicking on the selection box of each function the
user locks or unlocks the possibility to configure the menu using the keyboard of the