XT Keypad
Product description:
1.
Power LED
2.
Status LED
3.
Error LED
4.
Arm
5.
Home
6.
System status
7.
Disarm
8.
Pound key #
9.
Star key *
Installation mode = Installation PIN + *
10.
Emergency alarm: 7 + 9 (simultaneously)
11.
Fire alarm: 4 + 6 (simultaneously)
12.
Panic alarm: 1 + 3 (simultaneously)
13.
Battery breaker (delivery status)
14.
Mounting holes
15.
Tampering contact
Note
: The dual-key commands 1+3 (12.), 2+6 (11.), 7+9 (10.) are disabled by default.
LED indicators:
Power LED:
o
LED lights up orange: test mode is
active
o
LED flashes orange: test mode is
low battery
o
LED lights up blue for approx. five
seconds: System status is normal
o
LED flashes blue: Low battery
Note:
Normally all LEDs are off.
If you press any key, the power LED will
light up blue for five seconds. This signals
that the keypad is operational.
Status LED
(allows you to check the status of the alarm panel):
If you press the status button
of the keypad, the status LED will display the
current status of the alarm panel:
LED lights up red: alarm panel is in arm mode
LED flashes red: alarm panel is in home mode
LED lights up blue: alarm panel is in disarm mode
LED flashes blue: an error occurred, e.g.:
o
Alarm panel does not respond
o
Incorrect PIN code
Summary of Contents for LUPUSEC XT
Page 1: ...XT Keypad Manual...
