Assembly
As shown in the picture down below, the wire remote should be mounted right
next to the handle. Then attach the screw with the enclosed allen key size 2.
The remote lights green
Low beam is activated.
The remote doesn‘t light
The lamp is switched off or
daytime running light is activated.
The remote lights blue
High beam is activated.
Wire remote
Note:
When factory setting is active, the daytime running light of the SL X
lights up once after turning it on.
Mode
Brightness sensor
The sensor is activated.
Comment
When low beam is activated, it‘s possible to
change into high beam by pushing the wire
remote.
Turn on:
1. Activate the light at the display.
2. Turn it on by pushing the button of the wire remote.
Summary of Contents for SLX
Page 1: ......
