Assembly
1. Put the M4 bolt screw through the hole of the upper part of the holding
clamp. Follow the order: Screw / O-Ring / Holder / O-Ring
2. Mount the upper clamp on to the
lamphead. Use the enclosed allen
key size 3 for that. (2Nm)
Note: The screw should bite easily.
If not, please try to postition it and
screw it on again. Otherwise the
thread can be damaged.
2.
1.
3. Position the lamp together
with the the clamp at the
prefered side of the stem.
Then bring both halfs of the
mount together.
4. Allign the lamp correctly and
screw it tightly with the allen
key 2.5, max. 1Nm
Note: The mount should be positioned near to the stem. The notches of the
junction have to interlock perfectly. The lamphead should be positioned cen-
tered and also near to the stem.
3.
4.
Adjustment of the lamp:
Height of the light cone after
5m: Half height as outlet
Height for Mounting: 400-1200mm
5m:
1/2
Summary of Contents for SLX
Page 1: ......
