Montage
Montage
Screw the SL lamphead to the holder with two TX15 screws. Then attach
the appropriate socket for the fork crown with two other TX15 screws.
Now you can with the help of the included M6 allen screw fasten the unit
to the fork crown.
Important:
The beam must be at least inclined so that its center is only
half as high as 5 m away from the headlamp. For this, it may be necessary
to adjust the inclination of the mounts.
Height for Mounting: 400-1200mm
5m:
1/2
Height of the light cone after
5m: Half height as outlet
1. First, remove one of the existing Bosch holder arms and the two screws.
Install the supplied holder arm of the SL instead of the original Bosch
holder. To do this, use of the original Bosch holder screws.
(Max. torque: 1 Nm) Perform these steps on the other side as well.
Now screw on the SL to the two brackets on the Bosch display. To do this,
use to the supplied holder screws and a T15 Torx.
2.The orientation of the mount must be selected according to the stem
width. Tighten the mount screws firmly in order to attach the mount.
Now screw on the SL to the two brackets on the stem. To do this,
use to the supplied holder screws and a T15 Torx.
2.
1.
